Roof/Kitchen/Bathroom Versatile Type Waterproof Coating
|FOB Unit Price:||US $16.68 US $30|
|Purchase Qty. (kg)||FOB Unit Price|
|Production Capacity:||10000 Ton/Year|
|Payment Terms:||L/C, T/T|
- Model NO.: K11
- Ceiling Tile Shape: Liquid
- Thickness: 1.5mm
- Surface Treatment: Film Coated
- Certification: ISO
- Usage: Outdoor
- Origin: China
- Type: Roofing and Waterproofing
- Material: Cementitious Polymer
- Ceiling Tile Type: Liquid
- Function: Waterproof
- Color: Blue
- Trademark: Shuyang
GOODBOND K11 Roof/Kitchen/Bathroom Versatile Type Waterproof Coating is a double-component, acrylic polymer modified cementitious coating, composed of high-quality cement, graded aggregate, selected additives mixed powder and polymer liquid. Powder reacts with liquid when mixed and forms a tough elastic waterproof membrane, which has an excellent adhesion to concrete layer and mortar, forming an eternal combination to prevent water penetration.
l Excellent flexibility, Coated membrane within standing slight vibration and microcracks;
l Strong adhesion to substrates;
l Capable of applying on wet, complex and rough surface and enclosing light-weight, loose substrates and precast seams;
l Short drying time, less than 8 hours in ventilated and dry environment at 20 ºC;
l After membrane drying, tiles can be directly fitted or levelling;
l Coated membrane can prevent penetration of carbonate or chloride ion, and prevent salt pollution and erosion on concrete;
l Non-toxic, harmless, tasteless and environmental friendly;
l Excellent breathable performance and watertightness;
l Cold application, easy operation and maintenance.
3. Range of application:
Ø Substrates composed of concrete, masonry, precast body and light-weight bricks;
Ø Indoor and outdoor building walls, floors, roofs, kitchen, bathroom, balcony an flower bed etc.;
Ø Precast body seams, post cast strip interface, Structure expansion joint, veneer jointing and nozzle peripherals waterproofing treatment.
Ø Suitable for long-term water immersing parts, like water pools, fish pools and underground basements.
4. Substrate requirements
l Base surface must be solid, clean, smooth, no dust, no oil, no shedding and other loose objects;
l No apparent porosity, sand voids must blocked with GOODBOND anti-leakage prince and leveled, sharp edges should be treated;
l Inside corner and internal corner should be made to arc or 45 degree knuckle;
l The base surface must be fully wetted with water before construction, but no accumulated water;
l For newly poured concrete, there should have a certain Solid conservation time, preventing concrete shrinkage;
l For old concrete, must use industrial detergent or degreaser to clean it, rinse with clean water before brushing;
l Fully solid conservation before plastering surface;
l Luxury type can cover tiny cracks of less than 1mm. For more than 1mm crack, should use Anti-leakage prince for blocking; for expansion joint, first with sealant to seal, then reinforcing with polymer sealing tape no less than 100mm in width before construction.
5. Applying Method
Mixing ratio: liquid: powder=1:1.5
Mixing procedure: Pouring liquid component into a plastic drum. The powder component is gradually added to the liquid while mixing with a spiral paddle, continue paddling for 3-5 minutes until a lump-free slurry is obtained, and used up in operation time. Paddling speed of 400-500 rpm is recommended to achieve best performance.
Clean surface and wetting, but no accumulated water.
Detailing: pipe end should do seam treatment; inside corner and internal corner, pipe end should do reinforcement. Brushing times is determined by thickness, usually 2-3 times. Using a brush or roller for first coating, after the surface of first coating dry (around 1-3 hours), the second coating can be brushed. The direction of the second coating should be vertical to the first coating. If the first coating has been fully dry, then should wet it before second coating applying. Quantity consumption is around 0.5-1.0kg/m2/time.
l Construction temperature should be higher than 5ºC,raining weather and accumulated water environment is not suitable for construction;
l Ingredients should be used up when mixing to save cost, better used up in one hour;
l 24 hours after waterproofing layer construction and fully dried, there should be protection layer or decoration layer construction. Time should be longer for wet environment;
l If tiles are fitted, our supporting tile adhesive is recommended for better effect;
l This product can not drink; if accidentally splashed into the eyes, immediately wash with clean water or go to hospital.
7. Recommended consumption
For 1mm thickness, consumption is around 1.5-2.0kg/m2.
8. Package and storage
Ø This product should be stored in dry, ventilated and cool place. Storage temperature should be 5-40ºC;
Ø Shelf life of original seal product from production date, under normal transport and storage condition.
9. Executive Standard
When this product is used beyond our control, we only undertake the liability of replacing defective product, not assuming liability resulting from improper usage.